Commercial & Residential Painting

When it comes to paint, it's not just about curb appeal but it's also about protection. Paint Blast Pros only uses quality products that offer long lasting protection against the elements. Whether it's latex paint, stain or epoxy coatings, let the pros protect your property.

The key to long-lasting protection is preparation. Whether it's pressure washing or media blasting our expertly trained and highly experienced team will walk you through the best option for your project. Brick, wood, aluminum siding no matter the surface the pros know best.

Regardless of the project, we have a dependable team with the knowledge and experience to tackle any painting project. Whether it's aluminum/vinyl siding, a log home or drywall our specialists can handle any project.

All of our equipment is combined onto a truck and trailer combination. We have stripped cars in driveways, industrial lots, autobody shops, and even in our own shop. We take the blast to wherever is most convenient for you.

On the spectrum of options, Dustless Blasting ranks in the middle of pack. There are cheaper options, but those options don’t offer the same unique advantages, value and protection.

We do not price vehicles with a flat rate since every blast is different.  We generally charge an hourly rate for our services since there are varying degrees of prep, containment, detail required, amongst other factors.

We can give you an approximate cost if you send us pictures (by text or email) of the object to be blasted but we will also inquire about:

• Will it be “blast ready”?  No chrome, glass, delicate plastic, fiberglass, or even upholstery to remove or protect
• Where are we blasting? Setting up extensive containment in tight quarters takes time and resources
• What areas need blasted? You can imagine an exterior only blast varies drastically from underneath hood, firewall, trunk space, wheel wells etc…
• Do you want all body filler removed? Some customers actually opt not to remove it
• Who is providing the detailing of the spent media from inside the car/truck? Normally our customers prefer to do that with a shop-vac and airline but we occasionally do that as well.
• Is there onsite disposal for spent media? It’s much easier blasting on a gravel lot that doesn’t require recovering spent media

Knowing where we will be stripping the vehicle will be pertinent. It allows us to assess the surrounding area and will help us determine if it will be permissible for us to blast. The process will be loud (~115 dB) and although the water suppresses most of the media from becoming airborne, there will be a substantial amount of media in the surrounding immediate area of the blast site (~15 foot radius).
Most homes, driveways, and RV pads are potential blast sites.

When we arrive, we love it if we can get straight to blasting.  However, if you need us to help prepare the car, we are able and willing, but we charge for prep work such as protecting glass and chrome. This may include using heavy duty 6 mil plastic with heavy grade duct tape to protect it. We will also do the same with any chrome left on the vehicle. If your vehicle has had the interior removed, we will use tarp or plastic along the inside to help catch media and keep the interior as clean as possible. Finally, placing a large tarp under the vehicle catches most of the media that ricochets to the ground.

Once the blast is complete, we will wash down the car thoroughly with water that contains a rust inhibiting chemical known as “Hold Tight 102” or equivalent. These additives prevent the flash rust that is caused by the chloride being embedded into the metal while wet blasting for approximately a 48-72 hour window in which you will need to prime the metal before it begins to show signs of surface rust again. This window maybe slightly shorter or longer depending on variables such as where the vehicle is stored; we recommend storing it indoors and in a dry environment.

If you elect to have us blast the interior areas of the auto, such as interior trunk space, interior cab, or even some parts of the engine compartment, we usually take the liberty of blasting dry.  We do this because these areas rarely warp due to the nature of the steel in these areas.  Most importantly, cleaning dry abrasive out of these areas is exponentially easier than wet, damp media.  Whatever process we use, we will ensure that the interior of your vehicle is clear of debris using a shop vacuum.